Create a rule to auto schedule multiple ad slates after every asset segment

1. Click the Ad Automation label on the top-right side of the PLANNER application.

2. In the Ad Automation pane, provide a rule name that helps you identify, prioritize, and update the ad automation rule when multiple rules are available. 

Note: You can choose a different asset duration per your requirement or choose any other filters such as Asset Type, No. of Segments, etc.

3. Filter assets by Asset Duration → Greater than (>) → <asset duration>. This ensures that the rule will be applied to all assets having a duration greater than the specified time duration. In this case, 1 minute is taken as an example.  

Note: You can choose a different asset duration per your requirement.

4. Leave the default settings in the Flight duration as it is. This ensures that the rule will be applied to all the schedules starting from the current date. 
   
    
   
   

5. Provide the Ad break pattern.

   1. Select All ad breaks from the Apply to list so that this ad break pattern will be applied to all ad breaks available in the asset.

   2. Configure the ad break by following the below steps:

      1. Select a media type corresponding to the ad slate from the Ad media type.

      2. Select the Ad spot as Multiple.

      3. Provide the duration range of the ad media (minimum and maximum duration). 

6. Save the rule. 

7. Use the left pane of the Ad automation window to assign the priority.

Once done, test out the rule by scheduling an asset.